Need help?Do you have a question about the REL Acoustics Stampede and is the answer not in the manual?
General| Brand | REL Acoustics |
|---|---|
| Model | Stampede |
| Category | Speakers |
| Language | English |
Provides essential safety instructions for operation, including reading manual, avoiding water, and proper power connection.
Warns that the sub-bass system is heavy, advising users to take care when handling to avoid injury.
Connecting to the power amplifier using the UNBALANCED Neutrik high level input.
Connecting to mono block power amplifiers via the high level Neutrik input.
Details the specific wiring for mono block amplifiers, including ground connection.
Important note about not capturing chassis screws with nuts inside.
Connecting to amplifier/processor/receiver using a phono to phono LFE cable.
Explains REL's approach to augmenting full-range speaker systems for superior low bass.
Recommends the 'Hi Level' connection using the Neutrik Speakon cable as the first choice.
Advises placing the REL in a corner behind main speakers for best low bass performance.
States that basic setup should take no more than ten to fifteen minutes after connection.
How to adjust phase (0 or 180 degrees) for the loudest/fullest sound from the listening position.
Experimenting with woofer orientation relative to walls for optimal room acoustic interaction.
Fine-tuning the distance from the corner to achieve optimal bass extension and output.
Setting crossover and gain for seamless integration with main speakers.
Connecting LFE output for theatre systems and muting LFE for stereo listening.
Explains the Set-Safe® system that prevents clipping and protects the drive unit.
Discusses preventing damage from overloading and warranty exclusions.
To Next Page
