9
1 Power Pilot Light: Power On/O indicator.
2 O/ On/Auto Switch: Used to toggle between O (Le), Always On (middle) and Auto On mode (right).
3 Phase: Used to set phase 0-180 degrees.
4 Crossover: Used to adjust crossover frequency. Variable between 40-250Hz.
5 Level: Volume control for Input.
6 Le & Right Channel Low-Level RCA Input: Used to connect low-level signals to the sub-bass system
from the output of a preamplier, integrated amplier or receiver.
(For home cinema use, use .1/LFE input)
7 RCA Output: Used to connect or “daisy chain” another REL in tandem.
8 Power On/O Switch: Use to turn unit on or o.
9 Mains Select Switch: Slide switch used to set input AC between 120VAC and 230VAC.
10 IEC Mains Socket: Fused mains (AC) input socket that accepts detachable power cord.
REL SerieHT Rear Panel Connecon Legend
To Next Page
Loading...
