Reliable i300 - Product Features and Initial Setup; Key Product Features; Assembly and First Use

04
FOR HOUSEHOLD AND LIGHT
COMMERCIAL USE ONLY
FEATURES
• Yournewironingstationprovidesclean,professionalresultseverytime
• Theprofessionalironsoleplateismadefromdurable,andfast
heating aluminum
• Stainlesssteeloutershellconstructionforlonglife
• Adjustablethermostatallowsforaccuratetemperaturesettings
• Corkhandleironiscomfortableandstayscool
• Lowwaterlightindicator
• Autoshut-offthermostatprotection
• Regulartapwateror50/50tap/distilledwater
• 35p.s.ioperatingpressure
• 12-gaugeheavy-dutywiring
• Upto2hoursofsteam
IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the
garbage. Instead, go to your closest recycling station or waste collection centre
for subsequent treatment. In this way, you will be contributing to looking after
the environment.
HOW TO ASSEMBLE AND USE
1. Remove the ironing station from its packing and make sure all packing has
been removed (including the protective bags). Put the station on a flat and
solid surface.
2. It is recommended to put the iron on the iron pad, (supplied) as the pad will
withstand the temperature of the iron
3. Insert the two-piece wand (2) into the flange on top of the boiler, tighten with the
side screw and attach the spring on the iron hose to the coil end of the wand.
4. Unscrew the safety cap (1). Fill the boiler with a maximum of 4.65 cups (1.1
litres) of water for the i300. Use the funnel supplied, making sure you do not
overfill the tank (you can also use the water stick to determine the water level
in the steam tank).
5. Insert the plug into the electrical outlet; switch on the boiler (4) and steam
button (3). When the two button lights come on, the iron and boiler are working.