1515
About 50mm
55
5. Threading the needle thread (Fig. 15)
Turn the hand wheel to lift the thread take-up lever to its highest position.
6. Adjusting the stitch length (Fig. 16)
(1) Turn the stitch dial to make the pin aim
at the number on the stitch dial.
The more big the number becomes, the more
long the stitch length is.
Please put the feed lever at the medium
position, then the dial can been turned easily.
6. Sewing
1. Sewing method
(1) Turn the switch on;
(2) The sewing begins after step the pedal
1616
To Next Page
Loading...
