1
Model Number: THP401
PHONE-ALERT™ AUTOMATIC PHONE-OUT MONITORING SYSTEM
OWNER’S MANUAL
Product Description: This monitoring system is intended to monitor homes, cabins, vacant
properties and other premises for power outage, low temperature conditions and the presence of
water. The THP401 is designed to automatically call up to four telephone numbers when an alert
condition occurs, it will continue to place phone calls until someone answers and responds with a
code or until the alert condition no longer exists. Sensors for the power outage and low temperature
are housed inside the THP401, while the water sensor cable can connect to a jack on the side of the
device.
The THP401 will also accept any sensor that produces a switch closure that can be connected to the
Water Sensor jack. These include door and window open sensors and many other types of intrusion
sensors. Multiple sensors can be connected using a paralleling adaptor.
IMPORTANT: This monitoring system must be located where it has access to an active Touch
Tone™ telephone line and a 120-Volt electrical outlet. Read and thoroughly understand the
instructions and warranty prior to installation. It’s necessary to test this system after installation to
confirm it is compatible with the telephone line and the telephone numbers that will be called. This
monitoring system is an outgoing telephone device only and will not respond to or interfere with
incoming telephone calls.
Parts List:
THP401 Base Unit
3-Foot Phone Cord
Plastic Wall Anchors (2)
Wall Anchor Screws (2)
Water Sensor (Wired- Optional)
Built-in Rechargeable Battery
AC/DC Wall Voltage Adaptor (Power Plug)
To Next Page
Need help?
General
