Unpacking and Inspection
• When unpacking your Reliance SG-720 charger be sure to inspect
for any damage that may have occurred during shipping. If you
identify any shipping damage, please report the issue as a claim with
the freight company.
• Do not operate the charger if there is any damage to the unit, the AC
cord or the DC cord/paddle.
Charger Mounting Recommendations
The Reliance SG-720 charger has four mounting holes and two hanger
holes in the aluminum base to allow the end user multiple mounting
configurations.
When mounting the Reliance SG-720 charger, 1/4 - 20 nuts and bolts are
recommended to secure the charger. Using screws is not recommended.
The center holes can be used with a securely mounted hook to hang the
charger.
Introduction
5
To Next Page