Reloop Beatpad 2 User Manual

ENGLISH
P1
V1.1
BE ATPAD2
The Beatpad is a dedicated controller for the djay 2 app by Algoriddim for iOS & Android. It is a
class compliant USB plug-and-play device for Mac and PC
Please download and install the djay 2 app from the Apple AppStore, Google Play Store or
Amazon AppStore, respectively.
Place your tablet into the docking station and connect it via the matching adapter cable (Light-
ning / OTG Android / USB)
Connect the Beatpad 2 to your sound system via the master output (RCA/asymmetrical or
XLR/symmetrical)
Make sure that your Beatpad 2 is turned off
Now connect the included power supply unit
During connection, make sure that volume controls are in minimum position
Turn on your Beatpad 2 and launch the djay 2 app
Your Beatpad 2 will be recognised and installed without further configuration!
Note: If you have a Spotify premium account, you can connect it to the djay 2 app in order to have
access to millions of tracks within the app. To use Spotify an active internet connection is required.
Software: www.algoriddim.com
Driver & Firmware Updates: www.reloop.com
PROFESSIONAL CONTROLLER FOR DJAY 2 FOR IOS, ANDROID AND MAC OSX
QUICK START GUIDE
INSTALLATION & SETUP

Reloop Beatpad 2 Specifications

General

Mixer section	Yes
Product color	Black
Scratcher type	Digital Vinyl System (DVS) scratcher
Platter backlight	No
Number of mixer channels	2 channels
Number of scratcher platters	2
Apple docking compatibility	-

Weight and Dimensions

Depth	325 mm
Width	460 mm
Height	42 mm
Weight	4000 g

Summary

Installation and Setup

Initial Device and Software Setup

Download djay 2 app, connect tablet, sound system, and power supply unit.

Spotify Integration Note

Connect Spotify premium account for track access with an internet connection.

Pitch Controls

Pitch Fader and Bend

Adjust track speed permanently with the fader or temporarily with pitch bend.

Key Lock and Key Match Functions

Maintain track key with Key Lock; harmonically mix with Key Match.

Track Navigation and Jog Wheel

Track Selection and Loading

Browse and load tracks from media libraries using select encoder and load buttons.

Jog Wheel Modes and Search

Utilize vinyl/scratch mode, pitch bend, and fast track search with the jog wheel.

Mixer Section Controls

Master, Phones, Cue Mix, and AUX

Manage master output, headphone volume, headphone mix, and monitor output.

Library, Recording, and Deck Cueing

Switch libraries, record sets, and monitor individual decks via headphones.

Gain, EQ, and Line Fader Adjustment

Adjust input gain, select EQ modes, and control channel volume with the line fader.

Fader Start and Crossfader Operation

Enable fader-start for playback and fade between decks using the crossfader.

Transport Controls

Sync and Cue Point Management

Sync tracks to match BPM and create/manage temporary cue points.

Playback, Cue Navigation, and Effects

Play/pause tracks, jump to cue points, and activate brake/slip effects.

Performance Modes

Pad Modes: Cue, Sampler, Auto Loop, Bounce

Utilize pads for cueing, sampling, auto looping, and track slicing effects.

Pad Modes: Touch FX, Jog FX, Slicer

Apply instant effects, control parameters, and slice tracks into segments with pads.

Pad Modes: Looped Slicer

Looped Slicer mode repeats track segments destructively within a loop.

Connection Panels Overview

Audio and Microphone Connections

Connect microphones, headphones, external devices, and master output (RCA).

Control, Data, and Power Connections

Connect to PC/Mac via USB, iOS devices, security, LED dimmer, and power supply.