QUICK START GUIDE
MIXER SECTION
1
MASTER Controls the master output volume.
2
PHONES Controls your headphone volume.
3
CUE MIX Mixes the headphone signal between your selected channel and the master output signal.
4
AUX Controls the output volume to your DJ monitors.
5
LIBRARY/R EC By pressing you can switch to another media library.
SHIFT + Library = REC: Via REC you can record your set in djay 2..
6
CUE Allows you to monitor each deck via your headphones.
SHIFT + CUE left/right = Preview / Queue Preview: Lets you directly monitor the currently selected
track in your playlist without having to load it. Queue: Loads the track into the waiting queue tab.
7
GAIN Fine adjusts the input volume for each deck.
8
EQ You can select between two different equalizer modes.
Classic EQ: Controls the high, mid and low frequencies Filter EQ: Controls the high and low frequencies
and additionally offers a low/high pass filter.
The respective mode can be selected via the EQ preset switch on the device‘s backside.
9
LINE FADER Adjusts channel volume.
Shift + linefader = fader-start: Hold SHIFT and bring up a linefader to automatically start the track
from the temporary cue point. Bring the line fader down and the track returns to the temporary cue
point and goes into pause mode..
10
CROSSFADER Enables you to fade between your decks
1
2
3
4
5
6
99
7
10
8