Reloop RHP-15 User Manual

SAFETY INSTRUCTIONS
Any damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is
not liable for any damage to property or for personal injury caused by improper handling or non-observance of the safety
instructions.
- For reasons of safety the unauthorised conversion and/or modication of the device is prohibited. Please note that in
the event of damage caused by manual modication to this device any warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that
can be exchanged from the outside. Only qualied staff must carry out maintenance, otherwise warranty does not
apply!
- Avoid any concussions or violent impact when installing or operating the device.
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the
device away from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in
a closed vehicle).
- The device must not be operated after being taken from a cold environment into a warm environment. The condensa-
tion caused hereby may destroy your device. Do not operate the device until it has reached ambient temperature!
- This device should only be cleaned with a damp cloth. Never use solvents or cleaning uids with a petroleum base for
cleaning.
- Make sure to operate this device at low volume levels. Using high volume levels for long periods causes permanent
damage to the ears.
- Using headphones while riding bikes or driving motor bikes or cars is prohibited! Audio playback via headphones isola-
tes ambient noise such as carhorns.
APPLICATION IN ACCORDANCE WITH REGULATIONS
- These professional headphones are intended for use with hi devices as well as mixing consoles for DJ applications.
- If the device is used for any other purposes than those described in the operation manual, damage can be caused to
the product, leading to the exclusion of warranty rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the audio cord or casing as well as for wearout of wear
parts such as ear pads.
OPERATION
- Before operating the Reloop RHP-15 the volume level of the device that is used in combination with the headphones
should be brought to minimum position.
- Connect the headphones to the device. Then carefully turn up the volume and make sure not to use high volume levels
as this can cause damage to the ears.
FEATURES
- Closed DJ headphones with high-performance
50-mm drivers
- Powerful sound optimized for DJs
- Especially sturdy construction for professional use
- Smart retractable construction for compact and safe
transport
- Easily rotatable ear cups for flexible handling while spinning
- Comfortable and resistant head bracket with padding
- High-quality aluminium inlays with Reloop sign
- Very comfortable ear pads for long DJ sessions
- Removable connecting cable
- One-sided cable routing
- All connections gold-plated, incl. 6.3-mm adapter
TECHNICAL SPECIFICATIONS
The following specications are not veried by Global Distribution GmbH in terms of plausibility and accuracy:
- Frequency range: 10 Hz - 20 kHz
- Impedance: 42 ohms
- Acoustic pressure: 100 dB
- Maximum input: 2000 mW
- Connections: 3.5/6.3 mm jacks
- Weight: 310 g
ENGLISH

Reloop RHP-15 Specifications

General

Impedance	42 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Supraaural
Headphone frequency	10 - 20000 Hz
Maximum input power	2000 mW
Product color	Black
Wearing style	Head-band
Detachable cable	Yes
Recommended usage	Stage/Studio
Sound pressure level (max)	100 dB
Quantity	1
Audio adapters included	6.3 mm
Connectivity technology	Wired
Connector contacts plating	Gold
Microphone type	Not available

Weight and Dimensions

Weight	310 g