>> For details on how to save loops, see chapter „Sampling“.
The display shows „BANKP.=1“. By pressing the Cue/Sample Buttons 1 to 4 -15- in any sequence, an
individualised sequence of up to 12 samples can be programmed.
Select the scratch effect by pressing the Scratch Button -10-. In playback mode you can now
scratch and stop the track via the inner part of the Jog Wheel -18-, similar to a vinyl record. The
Jog Wheel -18- recognizes the touch of your ngers. Press the Scratch Button -10- again to deacti-
vate scratch effect.
The Display -11- indicates all the player‘s important functions:
A) Track/Folder
Indicates the number of the current track or folder (folder of an MP3-CD).
B) Time Mode
Indicates if the player shows the elapsed time of a track (no indication on the display), the re-
maining time of a track (display shows „Remain“) or the remaining time of the entire CD (display
shows „Total Remain“). Use the Time Button -7- to switch between these three modes.
C) Time
Indicates the time of the selected time mode in minutes, seconds and frames (1/75 min.).
D) Playing Address
Visualizes time display and increases or decreases, depending on the selected time mode. Shortly
before a track ends, the entire bar ashes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
