Reloop RP8000 Instruction Manual

ENGLISH
12
11.2 Firmware Upgrade
The RP-8000‘s rmware can be updated. Possible rmware updates will be offered by Reloop via www.reloop.com. This guarantees that your
turntable can be updated with new features and inprovements in the future.
1. Make sure that the RP-8000 is turned off (see setting ON/OFF Button -3-) and connected via USB to your computer.
2. Press and hold the SAMPLE Button and TRAX Encoder -26- and turn on the RP-8000.
3. Now release both buttons. The pitch LC display will read “Update”.
4. Start the upgrade program contained on the included CD.
5. Select the correct rmware le and press “Start”. The upgrade will now be carried out. After carrying it out successfully turn the RP-8000 off/on.
NOTE! Please observe that Java Runtime Environment is installed on your computer to carry out the update. Further information can be found
under www.java.com.
11.3 Expanded MIDI Functions
By pressing and holding the TRAX En-
coder and the USER Button while simul-
taneously turning on the turntable, you
will reach the setup menu. Each Drum
Pad features a function that can be tur-
ned on/off. If the respective pad is lit,
the function is activated. If it is not lit,
the function is deactivated.
MIDI MAP
Trigger Modes
Trigger Pads
Dual Mode (Hex) Additional Controls (Hex)
DRUM PAD FUNCTION
#1 PLAY Button, Reverse Button, 33/45 Button, Quartz Lock-Button, Pitch Fa-
der, Torque Dial, Start/Brake Dial, 8/16%-Buttons additionally send MIDI.
Please note that the respective analogue function will not be deactivated
(Default Off).
#2 Dual Mode can be (de-)activated. Please see chapter 10.3 for further infor-
mation.
#3 - #8 … Currently no assignment.
NAME FIRMWARE
Trax knob Bx,40,~3f/~41
Trax SW 9x,40,pp
Play/Pause 9x,45,pp
Reverse 9x,46,pp
33rpm 9x,47,pp
45rpm 9x,48,pp
78rpm 9x,49,pp
Quartz Lock 9x,4A,pp
+-8 9x,4B,pp
+-16 9x,4C,pp
+-50 9x,4D,pp
Torque Bx,4E,0-127
Start/Brake Bx,4F,0-127
Pitch Ex,LSB,MSB
NAME FIRMWARE LED PADS
CUE 9x,41,pp Hardware 9x,00-07,pp
LOOP 9x,42,pp Hardware 9x,08-0F,pp
SAMPLE 9x,43,pp Hardware 9x,10-17,pp
USER 9x,44,pp Hardware 9x,18-1F,pp
NAME CUE CUE(HOLD) LOOP LOOP(HOLD) SAMPLE SAMPLE(HOLD) USER USER(HOLD)
1 9x,00,pp 9x,20,pp 9x,08,pp 9x,28,pp 9x,10,pp 9x,30,pp 9x,18,pp 9x,38,pp
2 9x,01,pp 9x,21,pp 9x,09,pp 9x,29,pp 9x,11,pp 9x,31,pp 9x,19,pp 9x,39,pp
3 9x,02,pp 9x,22,pp 9x,0A,pp 9x,2A,pp 9x,12,pp 9x,32,pp 9x,1A,pp 9x,3A,pp
4 9x,03,pp 9x,23,pp 9x,0B,pp 9x,2B,pp 9x,13,pp 9x,33,pp 9x,1B,pp 9x,3B,pp
5 9x,04,pp 9x,24,pp 9x,0C,pp 9x,2C,pp 9x,14,pp 9x,34,pp 9x,1C,pp 9x,3C,pp
6 9x,05,pp 9x,25,pp 9x,0D,pp 9x,2D,pp 9x,15,pp 9x,35,pp 9x,1D,pp 9x,3D,pp
7 9x,06,pp 9x,26,pp 9x,0E,pp 9x,2E,pp 9x,16,pp 9x,36,pp 9x,1E,pp 9x,3E,pp
8 9x,07,pp 9x,27,pp 9x,0F,pp 9x,2F,pp 9x,17,pp 9x,37,pp 9x,1F,pp 9x,3F,pp
MODES PAD 1-4 PAD 5-8
Cue+Loop 9x,00-03,pp 9x,08-0B,pp
Cue+Sampler 9x,00-03,pp 9x,10-13,pp
Loop+Sampler 9x,08-0B,pp 9x,10-13,pp

Reloop RP8000 Specifications

General

Brand	Reloop
Model	RP8000
Category	Turntable
Language	English