Operational Instructions:
1. Turn on: Power on by connecting power source into outlet and plugging opposite end into
the pump input receiver.
2. To activate remote: press any button on either remote. The LCD screen will light up and turn
off after 15 seconds of not being used.
3. Only one control can activate the pump at a time.
4. For inflation and deflation: Press and release the upward arrow on remote to inflate. To
deflate, press and release the downward arrow on remote. The pressure level will increase or
decrease as per the change of pressure in your air chamber. The “scrolling bar” will scroll up or
down and show the pressure is increasing or decreasing. You may stop the inflating or deflating
at any time by pressing any button on the remote. Inflation will also stop automatically when it
has reached its max inflate number 100.
5. Memory Value: The memory function allows the user to find a desired air pressure and
return to the set pressure at the press of a button. To do so, press the “Memory” button. The
LCD screen will show “memory” and the pump will be activated to inflate or deflate until the
pressure level in the air chamber reaches the level memorized. If during the process you would
like the pump to stop, you may press any button.
6. Memory Save: To save a memory setting of your choice; Inflate or deflate your mattress to
your desired pressure. Once the pump has stopped at the desired comfort number, hold down
the Memory button for 3 seconds. The LCD screen will show “Memory” and then flash. The data
To Next Page
Loading...