Rem Wired Air System replacement pump

Need help?

Do you have a question about the Rem Wired Air System replacement pump and is the answer not in the manual?

Summary

Operational Instructions

Turn On

Power on the pump by connecting the power source to the outlet and the pump receiver.

Activate Remote

Press any button on the remote; the LCD screen will light up and turn off after 15 seconds of inactivity.

Single Control Activation

Only one remote control can activate the pump at a time.

Inflation and Deflation

Use up/down arrows to inflate/deflate. The pressure level adjusts; stop anytime or auto-stop at max.

Memory Value Retrieval

Press "Memory" to recall a desired air pressure; pump inflates/deflates to the memorized level.

Save Memory Setting

Inflate/deflate to desired pressure, then hold "Memory" for 3 seconds to save the setting.

Pressure Recovery

Press "Pressure Recovery" to restore the previously set air pressure level.

Pressure View

Press "Pressure View" to display the current air pressure level on the LCD screen.

The REM AIR SYSTEM is a wired remote control air pump designed as a replacement air system for luxury air mattresses. It emphasizes quality, performance, and user-friendliness with its simplistic setup and whisper technology.

Function Description

The primary function of the REM AIR SYSTEM is to inflate and deflate air chambers in mattresses, allowing users to adjust the firmness to their desired comfort level. It operates via a wired remote control, providing precise control over air pressure. The system supports both single and dual-chamber mattresses, with the ability to set and recall different pressure levels for each chamber in a dual setup.

Important Technical Specifications

Model: REM Wired Air System replacement pump
Voltage: DC12V
Power Supply: 100-240VAC/50-60HZ (for the adapter)
Pressure Range: 0-60mbar (displayed as a numerical value from 1-100 on the remote)
Flow Rate: 20 LPM (Liters Per Minute)
Power Consumption:
- Operating: 25W
- Standby: 2W
Weight: 2.3 Kg
Contour Dimensions: Length 260mm * Width 155mm * Height 105mm

Usage Features

The REM AIR SYSTEM offers several features to enhance user experience:

Power On: The system is powered on by connecting the power source to an outlet and plugging the opposite end into the pump's input receiver.
Remote Activation: The remote control's LCD screen activates by pressing any button and will turn off automatically after 15 seconds of inactivity to conserve power.
Single Control Operation: Only one remote control can activate the pump at any given time, preventing conflicting commands.
Inflation and Deflation:
- Inflation: Pressing and releasing the upward arrow on the remote initiates inflation. The pressure level increases, and a "scrolling bar" on the LCD indicates the rising pressure. Inflation automatically stops when the maximum inflate number (100) is reached.
- Deflation: Pressing and releasing the downward arrow on the remote initiates deflation. The pressure level decreases, and the "scrolling bar" indicates the falling pressure.
- Stopping Operation: Inflation or deflation can be stopped at any time by pressing any button on the remote.
Memory Function (Memory Value): This feature allows users to store and recall a desired air pressure setting.
- To activate a stored memory setting, press the "Memory" button. The LCD screen will display "memory," and the pump will adjust the air chamber pressure to the memorized level. The process can be interrupted by pressing any button.
Memory Save (Memory Save): Users can save their preferred comfort settings.
- To save a setting, first adjust the mattress to the desired pressure. Once the pump stops at the chosen comfort number, hold down the "Memory" button for 3 seconds. The LCD screen will show "Memory" and then flash, indicating that the setting has been memorized.
- For dual-chamber mattresses, different memory settings can be saved for each chamber. The default memory level is "25."
Pressure Recovery: By pressing the "Pressure Recovery" button, users can revert to the previously set pressure level. This is useful for quickly returning to a known comfortable setting after making temporary adjustments.
Pressure View: Pressing the "Pressure View" button allows the user to see the current pressure level displayed numerically on the LCD screen of the remote control.
Wired Remote Control: The system utilizes a wired remote, ensuring a reliable connection and eliminating concerns about battery life or wireless interference for the remote itself.

Maintenance Features

While the manual does not explicitly detail maintenance features, the design suggests a focus on durability and ease of use. The "replacement pump" designation implies that the pump unit is designed to be a standalone component that can be replaced if needed, rather than requiring a full system overhaul. The robust technical specifications, such as the 25W power and 2.3Kg weight, suggest a sturdy build quality intended for long-term use in a luxury mattress environment. The "whisper technology" indicates a design consideration for quiet operation, which is a common aspect of well-engineered, low-maintenance devices.