REMET CNC RT-630 - Prohibited Actions

REMET CNC TECHNOLOGY SP. Z O.O.
Page 13 z 22
Manufacturer of machinery and equipment, CNC machining service
5. PROHIBITED ACTIONS
1. It is forbidden to work with a chopper after consuming alcohol or narcotic
drugs and psychotropic substances (drugs) and drugs that weaken the ability to
react.
2. It is forbidden to use the chipper by:
• Unauthorized persons, untrained, unfamiliar with the operating instructions,
• Children (below the minimum age of the operator as defined by local regula-
tions),
• Pregnant women,
• People with limited mental capabilities.
3. It is forbidden to start work with a chipper without checking the technical
condition of the device.
4. Operators are prohibited from leaving the running machine unattended.
The engine of the tractor should be always switched off.
5. It is forbidden to make any adjustments to the chipper or make repairs
while the chipper is coupled to the tractor.
6. It is forbidden to use the machine with removed or damaged protections
such as covers and covers, drop and ejection funnels and missing warning de-
cals.
7. It is forbidden to use the device for other purposes than the ones it is in-
tended for.
8. It is forbidden to use the device while the driving tractor is moving.
9. It is prohibited to make any changes or modifications to the device, making
changes or modifications results in immediate loss of warranty. In addition, the
manufacturer shall not be liable for any resulting damage to property and per-
sonal injury, death of the operator) resulting from changes or modifications to
the device.