REMET CNC TECHNOLOGY SP. Z O.O.
Page 7 z 22
Manufacturer of machinery and equipment, CNC machining service
Personal protective equipment and pictograms
During working with a wood chipper, use:
• protective glasses or a face mask
• ear protectors
• protective gloves
• protective footwear
• protective clothing, tight fitting to the body, without loose straps or sleeves.
Oznacznie Opis Oznacznie Opis
Use hand protection
No unauthorized person! No unauthorized
person!
Wear foot protection
Prohibition of putting hands into the oil
feeder, Keep a safe distance from the inlet
hole and discharge area
Wear safety glasses
Warning! Danger of injury from rotating cut-
ting rollers. Keep hands and feet away from
the openings during machine operation.
Wear ear protection
Attention, it is possible to cut your fingers /
hands!
Read the user's manual
Attention, danger of intercepting / drawing
in / entangling!
Spinning elements!
Obligation to lubricate the gear
transmission
Warning, danger!
Recommended propeller shaft
speed: 540-1000 rpm
Attention rotating blades, danger of cutting
your fingers!
Do not walk on the surface of
the feed funnel!
Don't come in, don't stand up!
Warning! High oil pressure!
Use personal protective equipment.
Attention, fine parts falling out at high speed use personal
protection equipment (full face mask).
Warning! Rotating parts, danger of being caught.
To Next Page
Loading...
