Remington 076728J User Manual

®
®
IMPORTANT: Read and understand this manual before assembling or
operating this chain saw. Improper use of saw can cause severe
injury. Keep this manual for future reference.
MODELS
LNT-2: 076728J, 100089-06, & 099178H
EL-1, EL-1 Fast Sharp
EL-7: 075762J, 098031J, 099039J, 100015,
100089-01, 100089-04, 100089-05, & 100089-07
EL-7 Fast Sharp: 076702J
Pole Saw: 104316-01
Pole Saw Assembly: 104317
ELECTRIC CHAIN SAW
OWNER’S MANUAL
®
®

Remington 076728J Specifications

General

Brand	Remington
Model	076728J
Category	Chainsaw
Language	English

Summary

SAFETY WARNINGS

BEFORE OPERATING SAW

Covers pre-operation checks and precautions before using the chain saw.

WHILE OPERATING SAW

Covers safe operating practices and general advice during saw usage.

SAFETY WARNINGS Continued

KICKBACK HAZARDS AND PREVENTION

Explains the risk of kickback and provides methods to avoid it.

MAINTENANCE AND STORAGE OF CHAIN SAW

Covers cleaning, maintenance, and storage procedures for the chain saw.

CHAIN SAW NAMES AND TERMS

PRODUCT IDENTIFICATION AND UNPACKING

UNPACKING

Steps for checking contents and inspecting for damage after receiving the product.

ASSEMBLY INSTRUCTIONS

Install Front Hand Guard and Guide Bar

Steps for attaching key assembly components like the hand guard and guide bar.

ASSEMBLY Continued

INSTALLING AUTOMATIC CHAIN SHARPENER

Steps for installing the automatic chain sharpener feature on specific models.

SAW CHAIN TENSION ADJUSTMENT

FILLING OIL TANK

OPERATING CHAIN SAW

EXTENSION CORDS AND OILING CHAIN

Guidance on using extension cords and the procedure for oiling the chain and guide bar.

Proper Grip, Footing, and Starting Cuts

Safe practices for grip, footing, and initiating cuts with the chain saw.

OPERATING CHAIN SAW Continued

FELLING A TREE

Detailed steps and safety precautions for felling trees.

Before Felling a Tree

Preparations and inspections required before starting to fell a tree.

Felling Procedure

The actual steps involved in safely felling a tree, including notch and cut.

OPERATING CHAIN SAW Continued

LIMBING A TREE

Instructions for safely removing branches from a felled tree.

BUCKING A LOG

Techniques for cutting logs into smaller, manageable sections.

Bucking Log Support Methods

Cutting logs supported at one or both ends, and safety considerations.

OPERATING CHAIN SAW Continued

TRIMMING A TREE (Pruning)

Techniques for cutting limbs from living trees safely.

Pruning Tree Limbs

Step-by-step instructions for pruning tree limbs, including undercut methods.

CLEANING AND MAINTENANCE

Cleaning Saw Body and Guide Bar Care

How to clean the saw body and perform routine maintenance on the guide bar.

CLEANING AND MAINTENANCE Continued

SHARPENING SAW CHAIN (Non-Fast Sharp Model)

Detailed instructions for sharpening the chain on non-fast sharp models.

Items Needed to Sharpen Chain

List of necessary tools and supplies required for sharpening the saw chain.

CLEANING AND MAINTENANCE Continued

Filing Cutter Depth Gauges

Procedure for adjusting the cutter depth gauges after chain sharpening.

SHARPENING SAW CHAIN (Fast Sharp Model)

Instructions for sharpening the chain using the Fast Sharp system.

REPLACING SAW CHAIN

Guidance on when and how to replace the saw chain and drive sprocket.

TROUBLESHOOTING AND STORAGE

Common Saw Operational Issues

Diagnosing and resolving common problems like cutting, stalling, or motor issues.

Long-Term Storage Procedures

Steps for properly preparing and storing the saw for extended periods.

TECHNICAL SERVICE AND PUBLICATIONS

Contact information for support and resources for obtaining manuals and parts.

PARTS AND ACCESSORIES

AUTHORIZED SERVICE CENTERS

REPLACEMENT PARTS AND ACCESSORIES

REPAIR SERVICE AND WARRANTY

Warranty and Non-Warranty Service

Details on obtaining service under warranty and procedures for paid repairs.

Limited Warranty Policy

The terms and conditions of the product's limited warranty.