EasyManua.ls Logo

Remington B3 Style Series - INSTRUCTIONS FOR USE; FITTING THE ADJUSTABLE COMB; ADJUSTING THE TRIM LENGTH

Remington B3 Style Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Remove the batteries if the unit is not in use for long periods.
Non-rechargeable batteries are not to be recharged.
Dierent types of batteries or new and used batteries are not to be mixed.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the appliance and safely disposed of.
The supply terminals are not to be short-circuited.
INSTRUCTIONS FOR USE
FITTING THE ADJUSTABLE COMB
Hold the trimmer in one hand with your thumb rmly on the zoom wheel
to prevent it from turning. Ensure the length position indicator is at 0.4.
Slide the comb down the grooves until it clicks into place.
The comb can only be attached one way.
ADJUSTING THE TRIM LENGTH
The trimmer comb can be adjusted to give you 17 dierent trim lengths
simply by turning the wheel to the desired setting.
Select the comb length by rotating the zoom wheel upwards to increase
the length and downwards to decrease the length. Please see the table
below for the dierent length increments.
The wheel will click into place as it reaches each setting and the setting
number will appear on the length position indicator.
Setting Cutting Length
0.4 0.4 mm
1 1 mm
1.5 1.5 mm
2 2 mm
2.5 2.5 mm
3 3 mm
3.5 3.5 mm
4 4 mm
4.5 4.5 mm
5 5 mm
6 6 mm
8 8 mm
10 10 mm

Other manuals for Remington B3 Style Series

Related product manuals