Remington B3 Style Series - BLADE RELEASE; TIPS FOR BEST RESULTS; CARING FOR YOUR TRIMMER; RECYCLING

6
BLADE RELEASE
1. Ensure the trimmer is switched o.
2. Remove the adjustable comb.
3. Remove the blades by pushing your thumb upwards under the blades and move
the blade set away from the trimmer body.
4. To reattach the blades, align the back of the blades with the back housing at the
top of the trimmer and push down until the blade set clicks into place.
TIPS FOR BEST RESULTS
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before use.
• Comb your hair in the direction that it grows.
• Remove the adjustable comb if you are dening hairline edges such as sideburns,
trimming the nape of your neck, or trimming your beard line on front of neck.
CARING FOR YOUR TRIMMER
• To ensure long lasting performance of the trimmer, clean the blades and unit
regularly.
• Do not use harsh or abrasive cleaners on the unit or blades.
• This product has washable blades. Ensure the blades are detached from the
trimmer before washing the blades.
• Wash the blades under a running tap to remove any hair clippings.
• After rinsing under a tap ensure the blades are dry.
• Please note the main body of the trimmer is not washable and should be kept away
from water.
• After each use, it is recommended to clean hair from the blades either by rinsing the
blades or using a cleaning brush.
• We recommend that you oil the blades regularly. Add a few drops on all gliding
surfaces, the cutting area and back pads of the blades.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate ocial recycling/
collection point.