Remington EL-7 16-inch, EL-7 14-inch, LNT-3 12-inch, LNT-3 10-inch, LNT-2 10-inch, LNT-2 8-inch User Manual

ELECTRIC CHAIN SAW
OWNER’S MANUAL
®
IMPORTANT: Read and understand this manual before assembling or operating this
chain saw. Improper use of saw can cause severe injury. Keep this manual for future
reference.
®
Models EL-7 16", EL-7 14", LNT-3 12",
LNT-3 10", LNT-2 10", LNT-2 8"
CSA Classification for this saw is 2C; The consumer chain saw intended for general use by home owners, cottagers,
etc., and for such general applications as clearing, pruning, cutting firewood, etc.

Remington EL-7 16-inch, EL-7 14-inch, LNT-3 12-inch, LNT-3 10-inch, LNT-2 10-inch, LNT-2 8-inch Specifications

General

Bar Length	10 inch
Power Source	Electric
Chain Pitch	3/8 inch
Chain Gauge	0.050 inch
Weight	12.5 lbs
Voltage	120V
Model	Remington LNT-2 8-inch, Remington LNT-2 10-inch, Remington LNT-3 12-inch, Remington EL-7 14-inch, Remington LNT-3 10-inch, Remington EL-7 16-inch

Summary

Safety Symbols and Information

Wet Conditions Warning

Warning against operating the chain saw in wet environments.

Damaged Cable Safety

Immediate action required if the power cord is damaged.

Two-Hand Grip Operation

Proper grip technique for safe operation.

Kickback Hazard Awareness

Warning about the danger of kickback and how to avoid it.

Personal Protective Equipment

Requirement for personal protective equipment for ears and eyes.

Safety Warnings

Pre-Operation Safety Checklist

Procedures and conditions to check before using the saw.

Kickback Prevention Techniques

Information on kickback causes and how to prevent it.

Saw Maintenance and Kickback Safety

Pushback and Pull-In Hazards

Explanation of pushback and pull-in and how to avoid them.

Chain Saw Operation Guidelines

Maintenance and Storage of Chain Saw

General Maintenance Practices

Product Identification and Assembly

Assembly Instructions

Step-by-step instructions for assembling the chain saw.

Assembly Safety Cautions

Filling Oil Tank

Oil Filling Procedure

Saw Chain Tension Adjustment

Pre-Adjustment Checks

Adjusting Chain Tension

How to properly adjust the saw chain tension.

Post-Adjustment Tightening

Oiling Chain

Checking and Applying Oil

Cutting with the Chain Saw

Grip, Footing, and Starting

Trimming a Tree (Pruning)

Detailed steps for trimming branches from a living tree.

Felling a Tree

Before Felling a Tree

Steps to take before starting to fell a tree.

Felling Procedure

Instructions for making felling and notch cuts.

Limbing a Tree

Limbing Safety and Preparation

Limbing Technique

How to make cuts to remove limbs effectively.

Bucking a Log

Bucking Safety and Positioning

Bucking Technique

How to cut logs, including support and pressure.

Bucking Log Techniques

Bucking Log Supported on One End

How to cut a log supported only on one end.

Bucking Log Supported on Both Ends

How to cut a log supported on both ends.

Cleaning and Maintenance

Care of Guide Bar

Sharpening Your Saw Chain

Items Needed for Sharpening

Sharpening Cutter Technique

Step-by-step guide on how to sharpen the chain cutters.

Filing Cutter Depth Gauges

Depth Gauge Adjustment

Troubleshooting

Cutting Performance Issues

Remedies for saw not cutting or cutting poorly.

Motor and Power Problems

Solutions for motor not running or running slow.

Chain and Oil System Issues

Remedies for chain not moving, not getting oil, or coming off.

Saw Damage and Leaks