To Next PageTo Next Page
Need help?Do you have a question about the Remington RM1645 and is the answer not in the manual?
General| Type | Electric |
|---|---|
| Bar Length | 16 inches |
| Automatic Oiler | Yes |
| Motor Power | 12 Amp |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inch |
Crucial safety guidelines covering work area, electrical, and personal safety.
Proper usage, maintenance, and handling of power tools.
Detailed safety precautions and operational guidelines for chain saws.
Understanding and avoiding kickback during chain saw operation.
Precautions for using electric units, focusing on cords and power sources.
Essential guidelines for safe and effective chain saw operation.
Explains rotational, linear, and pull-in kickback mechanisms.
Steps to reduce the chance of accident or injury during operation.
Guidelines for maintenance, service, transport, storage, and keeping instructions.
Explains safety alert symbols, operational controls, and unit indicators.
Identifies key parts of the chain saw and its primary uses.
Defines key terms and components related to chain saw operation and safety.
Details product specifications and lists available replacement parts.
Steps for adding oil, adjusting tension, and connecting power.
Instructions for safely starting and stopping the chain saw.
Tips for effective cutting and preparing the work environment.
Guidelines for holding the unit and maintaining a stable position.
Step-by-step instructions for making cuts with the chain saw.
Safety measures to reduce risks during tree felling operations.
Instructions for removing buttress roots and making the undercut.
Procedure for making the felling back cut to fell the tree.
Steps for safely removing branches from a felled tree.
Safety measures to reduce risks during log cutting operations.
Procedures for cutting logs under stress and fully supported logs.
Techniques for cutting logs from above and below.
Step-by-step guide for pruning tree branches.
Outlines required maintenance tasks and frequency for the unit.
Instructions for filling and checking the chain oil reservoir.
Procedure for properly tensioning the saw chain.
Further details and steps for adjusting the saw chain tension.
Steps for removing and installing the guide bar and saw chain.
How to maintain and sharpen the saw chain for optimal performance.
Procedures for cleaning, inspecting, and maintaining the guide bar.
Advice on selecting and replacing guide bars and saw chains.
Instructions for cleaning the unit and preparing it for storage.
Diagnoses and resolves common issues encountered with the unit.
Outlines the terms, conditions, and coverage of the product warranty.
