To Next PageTo Next Page
Need help?Do you have a question about the Remington 100089-06 and is the answer not in the manual?
Important safety precautions to take before using the chain saw.
Safety guidelines to follow during chain saw operation.
Features on the saw designed to mitigate kickback.
Essential steps to prevent kickback during operation.
Covers unplugging, cleaning, lubrication, and part checks.
Guidelines for storing the saw when not in use for extended periods.
Explanations of essential chainsaw components and operational terms.
Steps for removing and checking contents of the saw's carton.
Important notes and warnings before starting assembly.
Detailed instructions for assembling the guide bar, chain, and hand guard.
Explains why maintaining correct chain tension is crucial for safety and performance.
Step-by-step guide for adjusting the chain tension.
How to properly fill the oil reservoir for the chain and guide bar.
Requirements and selection guide for outdoor extension cords.
Procedure for checking and oiling the chain before operation.
Detailed steps for safe and effective cutting techniques.
Pre-felling checks and preparation steps.
How to create the felling notch for directional tree cutting.
How to make the final felling cut and use hinge for control.
Safe practices and step-by-step guide for removing branches.
Essential warnings and safety tips for cutting logs into sections.
Technique for cutting logs supported only at one end.
Method for cutting logs supported at both ends to prevent pinching.
Critical safety advice for pruning branches, including kickback and position.
Step-by-step guide for cutting limbs from a living tree.
Instructions for safely cleaning the exterior of the chain saw.
How to clean, maintain, and identify when to replace the guide bar.
Explains benefits of a sharp chain and how to identify a dull one.
Step-by-step guide for sharpening the chain cutters using files.
How to adjust cutter depth gauges after sharpening.
When and how to replace the saw chain, including sprocket considerations.
Steps for preparing and storing the saw for periods over 30 days.
Guide to diagnosing and resolving issues like saw not cutting or stalling.
Diagram showing the parts of the LNT-2 model chainsaw.
A list of replaceable parts for the LNT-2 model with part numbers and descriptions.
Diagram showing the parts of the EL-7 model chainsaw.
A list of replaceable parts for the EL-7 model with part numbers and descriptions.
Contact information for authorized service centers across various states.
Contact information for authorized parts dealers across various states.
Additional contact information for authorized service centers in various states.
Lists of recommended replacement parts and accessories for specific chainsaw models.
Guidelines for obtaining repair services, including warranty and non-warranty.
Information on the product's warranty coverage, limitations, and claims process.
General