Need help?Do you have a question about the Remington LNT-2, EL-4, EL-7B, EL-3, EL-7 and is the answer not in the manual?
Identifies safety symbols and warnings found in the manual.
Essential checks and precautions before starting the chain saw operation.
Guidelines for safe operation of the chain saw during use.
Explanation and prevention of kickback, a dangerous chain saw reaction.
Details components related to kickback identification.
Covers unplugging the saw, maintaining chain sharpness, and inspecting components.
Lists and identifies the main parts of the electric chain saw.
Specific instructions for assembling the chain saw for certain models.
Specific instructions for assembling the chain saw for other models.
Instructions on how to properly adjust and maintain chain tension for safe operation.
Illustrates correct and incorrect chain tension states.
Guidance on selecting and using appropriate extension cords for the chain saw.
Procedure for lubricating the chain and guide bar before and during operation.
Techniques for safe and effective cutting using the electric chain saw.
Illustrates proper grip and trigger operation of the chain saw.
Function and activation of the chain brake for specific models.
Procedure for testing the chain brake functionality before operation.
Identifies the chain brake activation mechanism.
Step-by-step instructions for safely trimming branches from a living tree.
Details the sequence of cuts for pruning tree limbs.
Pre-felling inspection and preparation steps for safely cutting down a tree.
Illustrates retreat path and direction of tree fall.
Methods for creating felling notches and performing the main felling cut.
Technique for creating the directional notch for felling a tree.
Procedure for making the main cut to bring the tree down.
Labeling of cuts and key elements for tree felling.
Steps for safely removing branches from a fallen tree.
Method for cutting a log supported fully on the ground.
Technique for cutting a log supported at one end to prevent pinching.
Illustrates the two cuts for bucking a log supported on one end.
Procedure for cutting a log supported at both ends to avoid splintering.
Details the cuts for bucking a log supported on both ends.
Instructions for cleaning the exterior of the chain saw.
Maintenance steps for the guide bar to ensure proper cutting performance.
Routine care for the guide bar, including cleaning and burr removal.
Detailed steps for filing and sharpening the chain cutters to maintain sharpness.
Illustrates filing direction and tool placement for sharpening cutters.
Identifies parts of the chain and filing guide for sharpening.
Procedure for adjusting depth gauges to ensure proper chain cutting.
Shows depth gauge tool placement for filing.
Illustrates rounding the front corner of the depth gauge.
Table listing common problems, their causes, and recommended solutions.
Details the terms and conditions of the product's limited warranty.
To Next Page
General