EasyManua.ls Logo

Remington MB4110 - Charging via Standard Electrical Socket; USB Charging via PC

Remington MB4110
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
C GETTING STARTED
, CHARGING YOUR APPLIANCE
Before using your appliance for the first time, charge for 14-16 hours.
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains.
The charging indicator will illuminate.
The charging indicator will remain illuminated once charge is complete.
If the product is not going to be used for an extended period of time (2-3
months), unplug it from the mains and store.
To preserve the life of your batteries, let them run out every six months then
recharge for 14-16 hours.
, CHARGING VIA STANDARD ELECTRICAL SOCKET
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains.
The charging indicator will illuminate.
The charging indicator will remain illuminated once charge is complete.
Allow 14-16 hours for a full charge.
, USB CHARGING VIA PC
Ensure the product is switched off.
Connect your USB cable to the USB port on your power source.
Connect the USB cable to your appliance.
The charging indicator will illuminate.
The charging indicator will remain illuminated once charge is complete.
Allow 14-16 hours for a full charge.
, CORDED USE
Connect the charging adaptor to the product then to the mains.
When the cord is connected to the mains, a charging LED light will illuminate.
, CAUTION
Extended mains only use will result in the reduction of battery life.
, Warning: the appliance cannot be operated in corded mode whilst
connected to a PC via the USB port.
To use in corded mode the appliance must be connected to the mains.
, CORDLESS USE
When the unit is switched on and fully charged, the product can be used in
cordless mode for 40 minutes.
ENGLISH

Other manuals for Remington MB4110

Related product manuals