Remington MB4110 - Care for Your Personal Groomer; Cleaning and Maintaining Your Trimmer; After Each Use; Cleaning the Shaver

ENGLISH
4
080694_REM_IFU_PG410_22L.indd 4080694_REM_IFU_PG410_22L.indd 4 05.11.2008 13:56:09 Uhr05.11.2008 13:56:09 Uhr
CARE FOR YOUR PERSONAL GROOMER
CLEANING AND MAINTAINING YOUR
AFTER EACH USE
1.
Turn the
off.
2.
Gently brush the remaining hairs away/rinse under warm water from the guide comb and
trimmer blade.
CLEANING CAUTIONS
Only use the light-grade oil supplied or sewing machine oil on the blades.
Do not use harsh or corrosive cleaners on the units or their blades.
Do not submerge in water as damage will occur.
NOTE: Only rinse the shaver-/trimmer head under running water. Do not wash the whole
product as damage will occur.
STORAGE
Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).
Do not wrap the cord of the charging adaptor around the appliance.
CLEANING
Ensure the shaver is switched off and unplugged from the mains outlet.
Release the head assembly from the shaver body. (DIAGRAM A)
Gently tap the shaver head on a flat surface to remove the hair particles, and clean with
the cleaning brush supplied. (DIAGRAM B)
Never use the cleaning brush on the foils as damage may occur.
Close the shaving unit.
At regular intervals, put a drop of lubricant onto the shaving frame/head.
REPLACING THE FOIL & CUTTER
To ensure the continued highest quality performance from your shaver, we recommend
that foil and cutter are replaced regularly.
Signs that your foil and cutter need replacing:
1. Irritation: As foils get worn, you may experience skin irritation.
2. Pulling: As the cutters wear, your shave may not feel as close and you may feel your
cutter pulling your hair.
3. Wear through: You may notice that the cutters have worn through the foils.
TRIMMER
trimmer