Remington MB4125 - Maintenance and Troubleshooting; Blade Release and Care; Troubleshooting Common Issues

6
• Yourindexngershouldbecoveringtherootsofthehairsyouareliftingto
prevent accidental removal by the beard trimmer.
• Usingyourotherhand,holdthetrimmertothebaseofyourneckwiththe
cutting unit facing up and move the trimmer up the length of the neck until
it touches your nger covering the hair roots at the base of your head.
• Besuretomovetheunitslowlywhenperformingthisoperationandto
keep the roots at the base of your head out of the way of the trimmer.
, BLADE RELEASE
• Ensure the trimmer is switched o.
• Removetheadjustablecomb.
• Removethebladesbypushingyourthumbupwardsunderthebladesand
move the blade set away from the trimmer body.
• Toreattachtheblades,alignthebackofthebladeswiththebackhousingat
the top of the trimmer and push down until the blade set clicks into place.
E TIPS FOR BEST RESULTS
• Beard,moustacheandsideburnhairsshouldbedry.
• Avoidusinglotionsbeforeuse.
• Combyourhairinthedirectionthatitgrows.
C CARE FOR YOUR TRIMMER
• To ensure long lasting performance of the trimmer, clean the blades and unit
regularly.
• Ensure the appliance is switched o and unplugged from the mains.
• Do not use harsh or abrasive cleaners on the unit or blades.
• This product has washable blades. Ensure the blades are detached from the
trimmer before washing the blades.
• Wash the blades under a running tap to remove any hair clippings.
• After rinsing under a tap ensure the blades are dry.
• Do not rinse while the product is connected to the mains.
• After each use, it is recommended to clean hair from the blades either by
rinsing the blades or using a cleaning brush.
E TROUBLESHOOTING
, Trimmer blades do not move:
• The cutting unit may be dirty and clogged.
• Clean and lubricate the unit.
ENGLISH