6
• Usingyourotherhand,holdthetrimmertothebaseofyourneckwiththe
cutting unit facing up and move the trimmer up the length of the neck until
it touches your nger covering the hair roots at the base of your head.
• Besuretomovetheunitslowlywhenperformingthisoperationandto
keep the roots at the base of your head out of the way of the trimmer.
, TO DEFINE THE BEARD/MOUSTACHE LINE
• Hold the trimmer with the trimmer blade facing you.
• Start with the edge of beard/moustache line and gently lower the trimmer
blade onto your skin.
• Use motions towards the edge of the beard/moustache line to trim to
desired locations in facial area and away from beard in neck area.
, BLADE RELEASE
• Ensure the trimmer is switched o.
• Remove the adjustable comb.
• Remove the blades by pushing your thumb upwards under the blades and
move the blade set away from the trimmer body.
• To reattach the blades, align the back of the blades with the back housing at
the top of the trimmer and push down until the blade set clicks into place.
E TIPS FOR BEST RESULTS
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before use.
• Comb your hair in the direction that it grows.
C CARE FOR YOUR TRIMMER
• To ensure long lasting performance of the trimmer, clean the blades and unit
regularly.
• Ensure the appliance is switched o and unplugged from the mains.
• Do not use harsh or abrasive cleaners on the unit or blades.
• This product has washable blades. Ensure the blades are detached from the
trimmer before washing the blades.
• Wash the blades under a running tap to remove any hair clippings.
• After rinsing under a tap ensure the blades are dry.
• Do not rinse while the product is connected to the mains.
• Please note the main body of the trimmer is not washable and should be
kept away from water.
• After each use, it is recommended to clean hair from the blades either by
rinsing the blades or using a cleaning brush.
ENGLISH
To Next Page
Loading...
