7
Close hair cutting:
1. Use the ngers of one hand to lift the hair at the base of your head up o your neck.
2. Your index nger should be covering the roots of the hairs you are lifting to prevent
them from being accidentally cut.
3. Hold the trimmer to the base of your neck with the blade facing up. Move the
trimmer up the neck until it touches your index nger which is protecting the hair
roots.
4. Move your trimmer slowly and keep the hair roots at the base of your head out of the
way of the trimmer.
DETAILED NOSE, EYEBROW AND EAR HAIR TRIMMING
Attachments
Nose, ear and eyebrow trimmer
Nose and ear:
1. Fit the nose, ear and eyebrow trimmer.
2. Insert the attachment gently into the nostril or ear.
3. Gently move the attachment in and out while rotating the groomer at the same time.
• Don’t insert the attachment more than 6 mm into the nostril or ear.
Eyebrow:
1. Carefully guide the attachment to remove any stray or longer hairs from the eybrow.
2. To completely remove hairs, let the attachment touch the skin then move over the
desired area.
MICRO STUBBLE AND PRECISION TRIMMING
Attachments
Precision trimmer
Micro stubble:
The attachment has Trim Shave Technology which trims hair down to 0.2 mm to leave a
micro stubble nish.
1. Fit the precision trimmer.
2. Hold the attachment so that the guide on the lower edge of the blade contacts the
skin (in a the same way you as you would hold a wet razor). The guide on the lower
edge of the blade helps to stretch the skin during trimming.
3. Use motions similar to wet shaving.
Precision trimming:
1. Hold the precision trimmer attachment perpendicular to the skin.
2. Move it towards or away from the beard hair to achieve the desired result. Use gentle
pressure and controlled movements.
To Next Page
Loading...
