EasyManua.ls Logo

Remington PG6130 - Tips for Best Results; Care for Your Groomer; After Each Use Cleaning; Battery Removal

Remington PG6130
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
• Usemotionssimilartousingawetbladetoprovidetheclosesttrim.
, Note: The detail trimmer has Trim Shave Technology which trims hair to
0.2mm giving you that shaven look without the irritation wet blade shaving
causes.
• Theplasticinfrontofthebladeshelpstostretchtheskintoachievethe
close cut.
E TIPS FOR BEST RESULTS
Comb your hair in the direction that it grows so that the hairs are at their
maximum height and facing in the same direction.
• Aftertrimming,lightlygooverthetrimmedareaswiththefoiltogeta
smooth clean nish.
• Sinceallhairsdonotgrowinthesamedirection,youmaywanttotry
dierent trimming positions (i.e. upwards, downwards or across) for better
results.
C CARE FOR YOUR GROOMER
• Careforyourproducttoensurealonglastingperformance.We
recommend that you clean your groomer after each use.
, AFTER EACH USE
• Brushanyaccumulatedhairsfromthegroomerandattachmentheads.
• Theeasiestandmosthygienicwaytocleanthegroomerisbydetaching
the head from the groomer body and rinsing the head with warm water.
• Thegroomerbodyshouldnotberinsed.
• Placeoneortwodropsofcutteroilorsewingmachineoilontheblades.
• Turnthegroomerontodistributetheoilevenly,wipeoanyexcessoil.
BATTERY REMOVAL
The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing
the battery.
Ensure the trimmer is discharged of all power.
Remove the attachment head from the appliance.
Using a small screwdriver, pry o the front housing carefully.
Open the rear housing to expose the printed circuit board.
Cut the wires which connect the battery to the circuit board and remove the
battery.
The battery is to be disposed of safely.

Related product manuals