Remington PROluxe - Product Overview; Appliance Parts and Controls; Key Features and Functions; Instructions for Use

4
• Do not allow any part of the appliance touch the face, neck or scalp.
• Keep the power plug and cord away from heated surfaces.
• Do not use attachments other than those we supply.
• Do not use the appliance if it is damaged or malfunctions.
• Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly for any sign
damage.
• CAUTION: Always remove the appliance from the storage pouch/sleeve before heating and allow it to
fully cool before placing it back.
• This appliance is not intended for commercial or salon use.
PARTS
1. 19-32mm Advanced ceramic coated barrel
2. Cool tip
3. Display
4. Stand
5. Swivel cord
6. StyleAdapt™ sensor
7. StyleAdapt™ indicator
Controls:
K StyleAdapt™ on/o button
C On/o button
+/– Temperature functions
Accessories (not shown):
• Styling glove
• Styling mat
ADDITIONAL FEATURES
• Fast heat up—ready to use in 30 seconds.
• Automatic safety shut o – this unit will switch itself o if no button is pressed or it is left on after 60
minutes.
• Multivoltage: for home or abroad. At 120V times and temperatures may vary.
• Styling mat - for placing your styler onto between uses.
INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• For extra protection use a heat protection spray.
• Hairsprays contain ammable material – do not use while using this product.
• Section the hair prior to styling. Style the lower layers rst.
• Use the styling glove to avoid accidental burns.
1. Plug your styler into the mains power supply.
2. Press the on (C) button to switch on.
3. When it is ready to use, your styler will beep three times and the display will stop ashing.
StyleAdapt Mode
1. When rst switched on your styler will be in StyleAdapt™ mode 1. The StyleAdapt™ indicator will be
fully lit up and StyleAdapt 1 will be shown on the display.
2. Working on one section at a time, hold the handle with the cool tip facing down and wrap a section of
hair around the barrel.
• IMPORTANT: When wrapping ensure that hair is wrapped around the StyleAdapt™ sensor (Fig. A).
3. Wait 10-20 seconds for your curl to form.
4. Unwind the hair to release the curl.
ENGLISH