Remington QuickCut Pro - RECYCLING AND ADAPTER SPECIFICATIONS; RECYCLING GUIDELINES; ADAPTER TECHNICAL DATA

7
3. Remove the two screws from the inner housing.
4. Gently pry o the side panel and remove it.
5. Gently pry o the back panel (with switch) and remove it.
6. Gently pull the inner housing straight up and away to remove the inner housing shell.
7. Remove the two screws from the inner structure located on each side of the unit.
8. Remove the motor assembly and motor bracket.
9. Gently pull the circuit board and battery up out of the clipper.
10. Cut the red and black wires which lead to the battery.
• The battery is to be disposed of safely.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances,
appliances and rechargeable and non-rechargeable batteries marked with one of
these symbols must not be disposed of with unsorted municipal waste. Always
dispose of electrical and electronic products and, where applicable, rechargeable
and non-rechargeable batteries, at an appropriate ocial recycling/collection
point.
ADAPTER SPECIFICATIONS
Manufacturer address and
registration number
Spectrum Brands (UK) Limited, Regent Mill, Fir Street, Failsworth,
Manchester M35 0HS
Company number: 02394603
Adapter model number PA-4515U
Input voltage 100 - 240 V~
Input AC Frequency 50/60Hz
Output voltage
4.5 V D
Output current 1.5 A
Output power 6.75 W
Average active eciency ≥75.88%
Eciency at 10% -
No load power consumption ≤0.1W
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
NO
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
SR
BG
AE