EasyManua.ls Logo

Remington RM1025SPS - User Manual

Remington RM1025SPS
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
769-10045 / 00 07/14
Operator’s Manual
Electric Chain Saw / Pole Saw
RM1025P / RM1025SPS
TABLE OF CONTENTS
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Essential Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . .11
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Starting and Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
All information, illustrations, and specifications in this manual are based
on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
Copyright© 2014 MTD SOUTHWEST INC, All Rights Reserved.
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF
PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.
For assistance regarding the assembly, controls, operation or
maintenance of the unit, please call the Customer Support Department
at 1-866-206-2707 in the United States or 1-877-696-5533 in Canada.
Additional information about the unit can be found on our website at
www.remingtonpowertools.com.
For service, please call the Customer Support Department to obtain
a list of authorized service dealers near you. Service on this unit,
both within and after the warranty period, should only be performed
by an authorized and approved service dealer. When servicing, use
only identical replacement parts.
SERVICE
IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.
SAVE THESE INSTRUCTIONS

Questions and Answers

  • J
    joshua41Aug 8, 2025
    How to troubleshoot Remington Saw when the motor will not start?
    • M
      monique45Aug 9, 2025
      If the motor of your Remington Saw won't start, ensure the extension cord is securely connected to both the unit and the power source. Also, check if the GFCI in the outlet has tripped and reset it if needed. Another potential cause is a tripped breaker switch, which you can reset in your home's electrical panel. Finally, make sure you are pressing and holding the throttle lockout before squeezing the throttle control.
  • K
    kent90Aug 14, 2025
    What to do if the Remington RM1025SPS chain comes off the guide bar?
    • D
      dsandersAug 14, 2025
      If the Remington Saw chain comes off the guide bar, it could be because the saw chain tension is too loose. Try adjusting the saw chain tension.
  • S
    Sara McbrideAug 20, 2025
    What to do if the Remington RM1025SPS chain does not rotate?
    • T
      Tabitha ChapmanAug 20, 2025
      If the Remington Saw chain does not rotate, it could be due to a few reasons. The saw chain tension might be too tight, so try adjusting it. It's also possible that the guide bar and saw chain are assembled incorrectly. Inspect the guide bar and saw chain for any damage and replace them if necessary.
  • D
    David BanksAug 27, 2025
    Why is the guide bar and saw chain of my Remington Saw running hot and smoking?
    • G
      geraldingramAug 27, 2025
      If the guide bar and saw chain of your Remington Saw are running hot or smoking, it could be due to several reasons. First, check if the saw chain tension is too tight and adjust it. Secondly, ensure that the saw chain and guide bar have sufficient oil by filling the chain oil reservoir and pressing the chain oil bulb as needed. Lastly, inspect the guide bar groove and oil passages for dirt and clean them thoroughly.
  • G
    Gordon HerringSep 1, 2025
    Why does my Remington RM1025SPS motor lack power or stall?
    • C
      Cody DorseySep 1, 2025
      If the motor of your Remington Saw lacks power or stalls, the extension cord wire size may be inadequate. Use an extension cord with the necessary wire size. Refer to the wire size table in the Safety section.

Summary

Service

Safety

Important Safety Instructions

Comprehensive safety guidelines for operating power tools safely.

Chain Saw Safety Warnings

Specific safety precautions for chain saw operation.

Kickback Prevention

Guidance on understanding and preventing kickback.

General Safety Warnings

Broad safety advice applicable to all power tool use.

While Operating

Kickback Safety

Understanding Kickback

Explanation of kickback and its causes for user awareness.

Kickback Safety Precautions

Steps to minimize the risk of kickback accidents.

Know Your Unit

Specifications

Assembly

Starting and Stopping

Operation

Felling: Safety

Felling Procedure

Step-by-step guide for felling trees safely.

Bucking: Safety

Bucking Procedure

Steps for cutting a fallen tree into logs of desired lengths.

Pruning

Maintenance

Removing and Installing the Guide Bar and Saw Chain

Maintaining the Saw Chain

Troubleshooting

Remington RM1025SPS Specifications

General IconGeneral
TypePole Saw
Power SourceElectric
Bar Length10 inches
Weight7.5 lbs
Telescoping LengthUp to 10 feet
Amperage8 Amps
Maximum Reach15 ft

Related product manuals