Remootio 3 User Manual

• A - 1 x REMOOTIO 3 unit
• B - 1 x Sensor (wired part | 4m / 13.12Ft)
• C - 1 x Sensor (wireless part)
• D - 2 x Double-sided adhesives for mounting the sensor
• E - 1 x Double-sided adhesives for mounting the Remootio unit
• F - 1 x Power cord (USB A to barrel jack | 1 m / 3.28 feet)
• G - 1 x Control wire (1 m / 3.28 feet)
• H - 1 x Installation manual
• I - 1 x Bottom part of packaging
• J - 1 x Top part of packaging
• K - 1 x USB charger (depending on where you order from, the product is shipped with
type A (US), type C (EU), type G (UK) or type I (AUS) charger.
Read the instruction manual carefully and follow
the instructions
The printed instruction manual can be found on the back side of the paper insert.
Before you begin, make sure that the circuit breaker of the gate or garage door is
switched off and there is no power in the system.
Step 1 - Remove the plastic cover
Use a cross head screwdriver to remove the screw from the Remootio unit and remove the
plastic cover.

Remootio 3 Specifications

General

Connectivity	Wi-Fi, Bluetooth
User Capacity	Unlimited users
IFTTT Integration	Yes
Operating Voltage	12-24V DC
Power Supply	12-24V DC
App Control	iOS and Android
Voice Control	Amazon Alexa, Google Assistant
Operating Temperature	-20°C to +50°C (-4°F to +122°F)
Relay Outputs	2 relay outputs
Operating Range	Up to 100m (328ft) in open space for Bluetooth