Rev. 02 – July 16
th
, 2009
7 Normal Procedures
Normal Procedures 7 - 2
This section provides you with all the procedures for normal
operation of the aircraft including pre-flight preparations.
7.1 Preflight Check
Before each flight the following checks have to be conducted:
Checks outside the aircraft
1. Before moving the aircraft drain possible water from the fuel tank,
using the drain valve
2. Check engine oil level (between 1/2 and 1/4 of marking)*
3. Check level of engine coolant (between min. and max. marking)
4. Check proper condition of engine mounting
5. Check mounting and condition of the exhaust system
6. Check all water hoses and hose connections
7. Check that the cowling is closed and properly secured
8. Check propeller for damage and wear
9. Check gear and wheels/tires for damage, wear and correct air
pressure
10. Check wings and control surfaces for damage
11. Check wing main bolts, struts and stabilizer for damage
12. Check all control surfaces and connections for proper operation
13. Check for free and full travel of all control surfaces
14. Check elevator quick-fastener for secure locking
15. Check pitot tube, static ports and hoses for damage and dirt
16. Check fuel level and tank filler cap
Insecurely connection, improper operation of control surfaces or
insecure locked fasteners will lead to loss of control of the aircraft!!
* Please refer to the Rotax engine operators manual, latest issue, for
detailed information!
To Next Page
Loading...
