Need help?Do you have a question about the REMOVU M1 and is the answer not in the manual?
General| Polar Pattern | Omnidirectional |
|---|---|
| Connector | 3.5mm TRS |
| Frequency Response | 20Hz - 20kHz |
| Max SPL | 120 dB |
| Current Consumption | 0.5 mA |
| Type | Lavalier |
| Power Supply | Plug-in power |
Diagram and labels for the REMOVU M1 device components.
Diagram and labels for the REMOVU A1 device components.
Explains LED indicators for charging, pairing, and battery status on the M1.
Explains LED indicators for battery, pairing, and mode on the A1.
Instructions for attaching the swivel collar clip or mount connector to the M1.
Instructions for attaching the A1 to a GoPro camera.
Steps to pair the A1 microphone with the M1 receiver.
Steps to pair the A1 with other Bluetooth devices.
Instructions for switching between M1 and GoPro internal microphone.
Steps to activate and deactivate the audio amplification mode.
Instructions for using the waterproof housing with the M1 device.
Steps to remove the M1 device from the waterproof housing.
Details of the standard limited warranty terms and conditions.
Specific conditions and damages not covered by the limited warranty.
To Next Page