NU737_3_G5-FRA.qxd 2/11/04 9:15 Page 5.04
CLIO-TRICORPS NU737-3
C:\Documentum\Checkout\NU737_3_T5-ENG.win 14/12/2004 11:39
-page4
5.04
HUBCAPS - WHEELS
Hubcap with masked wheel
bolts
Using the end of the wheelbrace,
remove the hubcap by engaging the
hook in one of the openings in the
rim.
To refit, clip the hubcap in position
ensuring valve 1 is correctly
located. Push the retaining hooks
in, starting with valve side A,
followed by B and C, finishing at the
side opposite the valve D.
Central wheel trim with hidden
wheel bolts
Remove this using a hub cap
spanner (in the glove box) by
inserting spanner 2 into housing 3.
To refit it, align recess 3 with the
rim, clip the wheeltrim into
position and use spanner 2 to
tighten the nut.
We would advise you to note the
number engraved on the spanner
so that you can replace it if it is
lost.
To Next Page
Loading...
