NU737_3_G1-FRA.qxd 29/11/04 11:46 Page 1.09
CLIO-TRICORPS NU737-3
C:\Documentum\Checkout\NU737_3_T1-ENG.win 15/12/2004 7:44
-page17
1.09
REAR HEADRESTS
To adjust the height
Simply slide it up.
To remove the headrest
Press the head restraint guide tabs 1
and 2.
To refit the headrest
Insert the rods into the sleeves, with
the notches facing forwards, and
lower the headrest to the desired
height.
Central rear head restraint
adjustments
To adjust the height
Simply slide it up.
To remove the headrest
Press headrest guide tabs 1 and 2.
To refit the headrest
Insert the rods into the sleeves, with
the notches to the front, and lower
the headrest to the desired height.
Storage position
When the headrest is fully lowered,
it is in the storage position; do not
use this position when someone is
sitting in the rear seats.
The headrest is a safety
component. Ensure that
it is in place and in the
correct position: the top
of your head should be in line
with the top of the headrest.
To Next Page
Loading...
