Renault KWID - Bonnet

bonnet...................................................(up to the end of the DU)
4.2
ENG_UD45816_1
Capot moteur (BBA - Renault)
Bonnet

To open the bonnet, pull the knob 1.

To unlock, gently lift the bonnet and
push tab 2 in the direction of arrow A to
release the latch 3.

Lift the bonnet; remove the Hood-Stay
rod from lock clip and place into the
hole to hold the Hood open.

To close the bonnet again, remove the
Hood-Stay rod 4 from the hole and
place to the lock clip; lower it to 30 cm
above the closed position, then release
it. It will latch automatically under its
own weight.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
come on at any moment.
Risk of injury.
In the event of even a slight
impact involving the radia-
tor grille or bonnet, have
the bonnet lock checked by
an approved Dealer as soon as pos-
sible.
Do not press down on the
bonnet: there is a risk that
the bonnet may accidentally
close.
Make sure nothing is left
in the engine compartment
(cloth, tools, etc.).
These may damage the
engine or cause a fire.
Ensure that the bonnet is
properly locked.
Ensure that nothing is pre-
venting locking (grit, cloths,
etc.).
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in the park position.
Risk of injury.