5.9
ENG_UD45828_1
Fusibles GPL X52 (BBA - Renault)
– Follow the steps under BONNET
section to open the bonnet
– Remove the Electric harness
connector 1.
– Remove the Dust cap from head
lamp bulb mounting area 2.
– Release the lock spring 3.
– Remove the head lamp main bulb
and replace the bulb with the new
one.
– Once the new lamp is fitted, follow
the steps vice-versa to assemble
other parts in lamp unit.Make sure
the Dust cap is re-fitted correctly.
DO NOT TOUCH BULB GLASS. HOLD
IT BY ITS BASE
The head lamp bulbs can be replaced.
However, we recommend you to have
them replaced with the approved dealer
if it proves difficult.
To comply with legislation or as a
precaution, you can obtain an
emergency kit from your approved
dealer containing a set of spare bulbs
and fuses.
The engine may be hot
during operations in close
proximity.In addition, the
engine cooling fan may
come on at any moment.
Risk of injury.
The bulbs are under
pressure and can break
when replaced.
Risk of injury.
To Next Page
Loading...
