Renault WIND - Vehicle Identification Plates

vehicle identification .............................(up to the end of the DU)
paintwork
reference ..........................................................(current page)
vehicle identification plates ...................(up to the end of the DU)
technical specifications .........................(up to the end of the DU)
6.2
ENG_UD25711_2
Plaques d’identification véhicule (X35 - E33 - X33 - Renault)ENG_NU_865-5_E33_Renault_6
Vehicle identification plates
VEHICLE IDENTIFICATION PLATES
The information shown on the ve-
hicle identification plate should be
quoted on all correspondence or
orders.
The presence and location of the in-
formation depends on the vehicle.
Vehicle identification plate A
1 Vehicle type and chassis number.
Depending on the vehicle, this in-
formation is also given on mark-
ing B.
2 MMAC (Maximum permissible all-up
weight).
A
1
2
3
4
5
6
7
8
9
10
12
13
11
A
B
3 GTW (Gross train weight – vehicle
fully loaded, with trailer).
4 MMTA (Maximum permissible
weight) front axle.
5 Maximum permissible weight on rear
axle.
6 Technical specifications of vehicle.
7 Paint reference.
8 Equipment level.
9 Vehicle type.
10 Trim code.
11 Additional equipment specification.
12 Production number.
13 Interior trim code.