CRUISE CONTROL - SPEED LIMITER: limiter function (3/3)
1
4 5
Putting the function on
standby
The speed limiter function is sus-
pended when you press switch 4 (O).
In this case, the limit speed remains
memorised and the message “SPEED
MEMORY” accompanied by this speed
appears on the instrument panel.
Switching off the function
The speed limiter function is interrupted
when you press switch 1. In this case,
the speed is no longer memorised. The
orange indicator light
on the instru-
ment panel goes out, confirming that
the function is deactivated.
Recalling the limit speed
If a speed has been stored, it can be re-
called by pressing switch 5 (R).
When the speed limiter is sus-
pended, pressing switch 2 (+) or 3
(-) reactivates the function without
taking into account the memorised
speed: it is the speed at which the
vehicle is moving that is taken into
account.
2
3
To Next Page
Loading...
