ROTATING HARD ROOF: opening/closing
1
2
Closing the roof
Lift switch 2 and hold it until the roof
is fully closed. The side windows and
roof cover open. The message “ROOF
CLOSING” appears on the instrument
panel accompanied by squares which
indicate the progress. The roof and its
cover close. If the message “LOCK
ROOF LATCH” appears on the instru-
ment panel accompanied by a beep, re-
lease switch 2.
Before opening/closing the
roof
Make sure there are no objects in the
way of the roof’s operating area.
Make sure that there are no objects
resting on the roof or roof cover.
Make sure that the luggage compart-
ment lid is properly closed.
Opening the roof
Unlock the roof by pulling and turning
control 1 clockwise. Please note: only
unlocking is manual – do not lift up
the roof.
Push switch 2 down and hold it until the
roof is fully open. The message “ROOF
OPENING” appears on the instrument
panel accompanied by squares which
indicate the progress. The side win-
dows and the roof cover open, the roof
moves into its housing and the roof
cover closes.
If the message “ROOF OPENED” ap-
pears on the instrument panel accom-
panied by a beep, release switch 2.
To avoid all risk of injury,
ensure that nobody is in
the proximity of the moving
parts.
Pull and lock the roof by turning con-
trol 1 anticlockwise.
The windows do not rise automatically
at the end of the roof closure cycle. Lift
the electric window switches to raise
the windows.
To Next Page
Loading...
