ROTATING HARD ROOF: operating fault (2/2)
Close the roof again manually (move-
ment B), making sure that there is no
contact with the roof cover.
Lower the roof cover using the emer-
gency key to turn the screw anticlock-
wise until the roof cover closes (point of
resistance).
Engage plastic cover 2 in its housing.
Clip on the logo.
Pull and turn control 3 anticlockwise to
lock the roof.
Consult an approved dealer.
B
2
3
If the message “CHECK ROOF” ap-
pears on the instrument panel con-
tinually or when the roof open/close
switch is pressed, consult an ap-
proved dealer.
To Next Page
Loading...
