Need help?Do you have a question about the Rendamax R2000 Series and is the answer not in the manual?
Describes the EM control option using PID for constant flow temperature regulation.
Explains the EW control for weather compensation and night-time temperature reduction.
Outlines mandatory requirements and standards for installing the R2000 boiler.
Outlines general steps for commissioning, including system flushing and connections.
Lists essential checks before initial ignition and during dry run operations.
Describes critical checks to perform while the boiler is running live.
Describes fault conditions, associated indicator lamps, and procedures for resetting the boiler.
Provides a table to diagnose and resolve common boiler faults and their possible causes.
Emphasizes essential safety measures and protective gear required during boiler servicing.
Lists the scope of routine maintenance, including checks for gas soundness and ventilation.
Provides instructions for replacing key components like electrodes, burner bars, injectors, and gas train parts.
To Next Page
General
