Need help?Do you have a question about the Rendamax R2122 and is the answer not in the manual?
Detailed identification of the key parts of the R2000 series boiler.
Explains how the boiler's output is controlled.
Electronic Modulating control with PID regulator for stable flow temperature.
Weather-compensated control with night-time reduction feature.
Monitors water flow, shuts down burner if insufficient.
Shuts down burner if temperature exceeds limit.
Protects against overpressure by releasing excess pressure.
Guidelines for safe and compliant installation according to standards.
Covers maintenance, modification, and operational safety aspects.
Safety guidelines for working in hazardous areas and potential risks.
Initial steps and personnel requirements for safe commissioning.
Procedures for setting burner pressure at minimum and full load.
Checks performed before initial ignition of the boiler.
Verifying gas and electrical safety before ignition.
Verifying pump operation and flow switch functionality.
Pressure testing gas train components for leaks.
Procedures for checking boiler operation after ignition and during run.
Explains error lamps and lockout conditions for troubleshooting.
Lists common faults, their causes, and recommended solutions.
Personal protective equipment and precautions for service work.
Procedures for annual maintenance and checks of boiler systems.
Instructions for replacing various boiler components.
General| Model | R2122 |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Stainless Steel |
| Safety Features | Overheat Protection |
To Next Page
