Need help?Do you have a question about the Renegade REN 1100 S and is the answer not in the manual?
General| Impedance | 10000 Ω |
|---|---|
| RMS rated power | 540 W |
| Audio output channels | 4.0 channels |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| Total Harmonic Distortion (THD) | 0.5 % |
| Equalizer | Yes |
| Product color | Black |
| Dimensions (WxDxH) | 255 x 320 x 55 mm |
| Power requirements | 12 V DC / 40A |
| Output power description | 4 x 275W |
| Connectivity technology | Wired |
Technical specifications for the REN 550 S 2-channel amplifier.
Technical specifications for the REN 1100 S 4-channel amplifier.
Guidance on optimal amplifier mounting location and airflow.
Steps for physically mounting the amplifier using screws.
Details on connecting ground, remote turn-on, and power (+12V).
Connecting audio sources via speaker outputs or RCA inputs.
Using line outputs to send audio signals to another amplifier.
Adjusting the bass boost levels for desired low-frequency response.
Configuring lowpass and highpass filters for speaker output.
Connecting speakers to the amplifier in 2-channel mode.
Connecting a subwoofer in bridged mono mode.
Connecting front and rear speakers in 4-channel mode.
Connecting front speakers and a subwoofer in 3-channel mode.
Diagnosing issues when the Protect LED is on (REN 1100 S).
Addressing amplifier overheating and low output power.
Troubleshooting blown fuses and system not turning on.
Resolving hiss, electrical interference, and engine RPM whine.
To Next Page
