Renesas RZ/A2M Quick Start Guide

Quick Start
Renesas Evaluation Board Kit
for RZ/A2M
Display Output
Board
User Switches
User LED
MIPI Camera
Header
Reset Switch
Debugger Header
Power LED
J-Link Lite
Debugger
Power Switch
CPU Board
Socket
CPU Board
Sub Board
MIPI 8MP
Camera Board
USB Power
(Mini USB)
USB Serial
(Micro USB)
NOTE: This Quick Start Guide covers installation of the e
2
studio IDE (available from https://www.renesas.com/e2studio
where version 7.3.0 or later is required). An active internet connection is required for downloading the installer.
1. Installation
Do not connect the debugger module until the software support has been installed.
Internet access is required during the installation process.
1. Software for this Renesas Evaluation Board Kit is available for download from;
2. After download the installer will run and display the Welcome dialog box. Follow the on-screen instructions to install
the IDE software, selecting the RZ device family when prompted. This process will take several minutes.
Note:
Windows™ 10 / 8.1 / 8 / 7 users may see “User Account Control” dialog box. If applicable, enter the administrator
password and click ‘Yes’.
The Windows™ driver signing dialog box may be displayed. Please accept the driver to continue.
Users may see a Renesas trust certificate dialog box. If applicable select the checkbox to trust the certificate.
https://www.renesas.com/rza2mevb

Renesas RZ/A2M Specifications

General

Brand	Renesas
Model	RZ/A2M
Category	Computer Hardware
Language	English