Renesas RH850/F1KM-S4 User Manual

All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corp. without notice. Please review the latest information published by
Renesas Electronics Corp. through various means, including the Renesas Technology Corp.
website (http://www.renesas.com).
The newest version of this document can be obtained from the following web location
http://www.renesas.eu/updates?oc=Y-RH850-F1X-272PIN-PB-T2-V1
www. renesas.com
RH850 Evaluation Platform
RH850/F1KM-S4 272pin
RH850/F1KH-D8 272pin
PiggyBack board
Y-RH850-F1X-272PIN-PB-T2-V1
R20UT4009ED0100, Rev. 1.0
2017-07-12
32
Use
r´s
Manual

Renesas RH850/F1KM-S4 Specifications

General

Brand	Renesas
Model	RH850/F1KM-S4
Category	Computer Hardware
Language	English

Summary

RH850 PiggyBack Board Introduction

RH850 PiggyBack Board Overview

PiggyBack Board Visuals

Provides visual representations and views of the Piggyback Board.

Device Mounting and Jumper Configuration

Microcontroller Mounting Procedure

Step-by-step instructions for installing the microcontroller onto the socket.

Jumper Settings for Board Configuration

Details jumper settings for configuring board functions and operation modes.

Power Supply and Voltage Distribution

Connecting Power to the Board

Explains the methods for connecting power supply voltages to the board.

Device Power Supply Pin Assignments

Details the required device power supply pins and their respective functions.

Clock Source Options

Main Oscillator (MainOsc) Configuration

Describes options and compatibility for the main crystal oscillator.

Sub-Oscillator (SubOSC) Details

Details the 32.768kHz sub-oscillator provided with the board.

Debug and Programming Interface

Other Circuitry Features

Reset Push Button Functionality

Details the function and operational use of the reset push button (SW1).

Device Mode Selection via Jumpers

Explains how to select device operation modes using specific jumpers.

Signalling LED Indicators

Connectors for Device Port Access

MainBoard Connectivity via Connectors

Introduces connectors used for linking the PiggyBoard to a MainBoard.

Connector CN1 Pinout and Signals

Details the signal connections and pinout for the CN1 connector.

Connector CN2 Pinout and Signals

Details the signal connections and pinout for the CN2 connector.

Connector CN3 Pinout and Signals

Details the signal connections and pinout for the CN3 connector.

Mechanical Dimensions of the Board

Schematic Diagram of the Board

Document Revision History