F1KM-S4, F1KH-D8 272pin PiggyBack board Y-RH850-F1X-272PIN-PB-T2-V1
R20UT4009ED0100 Rev.1.0 14
2017-07-12
6.3 Signalling LEDs
Eight LEDs are provided to allow visual observation of the output state of device
port pins. Device pins P8_0 to P8_7 are connected to the even pins 2 to 16 of the
pin header CN24, while the LEDs 1 to 8 are connected to the odd pins 1 to 15,
respectively.
Thus the LEDs can be either connected to
the device port pins P8_0 to P8_7 by closing the connection on CN24
using a jumper, or
any device port pin by using the provided wire connections.
To Next Page
Loading...
