6
Treatment Steps:
Step 2: Apply Gel
Apply a small amount of gel to
the area you wish to treat.
Step 3: Turn on the LaserTouchOne™
Push the on/o button on the LTO once.
Step 4: Apply the LaserTouchOne™
Use a paint-stroke or circular
motion to treat the painful
area. Adjust the dial toward the
positive (+) sign until you feel
a slight tingle. Remove your
nger from the dial leaving it at
that setting.
Step 1: Adjust the E-Stim Wheel
Turn the dial (e-stim wheel)
on the side of the device
completely toward the minus (-)
sign (as shown by the arrow).
To Next Page