Renfert Vario basic - Page 6

- 2 -
EN
Lamp fails to go on. • Power cord not connected.
• Illumination defect.
The device with uorescent tubes
• Theuorescenttubeisnotsituatedcor-
rectly in the socket.
• Theuorescenttubeisdefect.
• Plug the power cord into the wall outlet.
• Change light using the service or see spare part list.
• Checkthattheuorescenttubeisttedcorrectly(see
chapter 7.7.2).
• Changingtheuorescenttubes(seechapter7.7.2).